中文版
Home Material DIN 17752-2002
简体 | 繁體
Grade NiMo16Cr16Ti
Germany W-Nr. 2.4610
Corresponding Standard DIN 17752-2002
Wrought nickel and nickel alloy rod and bars Requirements and testing
Classification Nickel and Nickel Alloys
Properties Corrosion Resistance
Density 8.6 g/cm3
NiMo16Cr16Ti Chemical Element Composition Content (%)
Component Fe C Si Mn P S Cr Cu Mo Ti Co More
Minimum Value - - - - - - 14 - 14 - - Ni:余量
Maximum Value 3 0.015 0.08 1 0.025 0.015 18 0.5 17 0.7 2
NiMo16Cr16Ti Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
Bars; d≤160 Solution Heat Treatment (F69) ≥690 ≥280 ≥35 ≤240 HBW2.5/62.5
1 Approximate Comparison Table Deformed High-Temperature Alloy
China United States Germany United Kingdom
GB Commercial Grade DIN EN/DIN W-Nr. Commercial Grade
(GH182) Hastelloy C4 NiMo16Cr16Ti 2.4610 Hastelloy C4
2 Approximate Comparison Table Corrosion-Resistant Alloy
China United States Germany
GB ISC Commercial Grade UNS DIN EN/DIN W-Nr.
NS 3305
(NS 335)
(00Cr16Ni65Mo16Ti) 		H 06455
(H 03305) 		Hastelloy C -4 N 06455 NiMo16Cr16Ti 2.4610
NiMo16Cr16Ti Corresponding Standards(Same grade name, different standards)
1 DIN 17750-2002
NiMo16Cr16Ti 2.4610
2 DIN 17744-2002
NiMo16Cr16Ti 2.4610
3 DIN 17752-2002
NiMo16Cr16Ti 2.4610
4 DIN 17744-2020
NiMo16Cr16Ti 2.4610

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!