NiCr20CuMo 2.4660 - DIN 17752-2002

Grade	NiCr20CuMo
Germany W-Nr.	2.4660
Corresponding Standard	DIN 17752-2002 Wrought nickel and nickel alloy rod and bars Requirements and testing
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.1 g/cm³

NiCr20CuMo Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	Co	More
Minimum Value	-	-	-	-	-	19	32	3	2	-	Fe:余量；Nb+Ta:8C~1.00
Maximum Value	0.07	1	2	0.025	0.015	21	38	4	3	1.5	Fe:余量；Nb+Ta:8C~1.00

NiCr20CuMo Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bars; d ≤ 90	Soft annealing (F55)	≥550	≥240	≥40	-

Approximate Comparison Table Corrosion-Resistant Alloy

NiCr20CuMo Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!