中文版
Home Material DIN 17752-2002
简体 | 繁體
Grade NiCr21Mo
Germany W-Nr. 2.4858
Corresponding Standard DIN 17752-2002
Wrought nickel and nickel alloy rod and bars Requirements and testing
Classification Nickel and Nickel Alloys
Properties Corrosion Resistance
Density 8.1 g/cm3
NiCr21Mo Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Cu Mo Ti Co Al More
Minimum Value - - - - - 19.5 38 1.5 2.5 0.6 - - Fe:余量
Maximum Value 0.025 0.5 1 0.02 0.015 23.5 46 3 3.5 1.2 1 0.2
NiCr21Mo Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
Bars; d≤160 Soft annealing (F59) ≥590 ≥240 ≥30 ≤210 HBW2.5/62.5
1 Approximate Comparison Table
United States Germany France
Commercial Grade DIN EN/DIN W-Nr. NF EN/NF
Incoloy 825 NiCr21Mo 2.4858 NC21FeDU
2 Approximate Comparison Table corrosion-resistant alloy
China Japan South Korea United States Germany United Kingdom
GB ISC JIS KS Commercial Grade UNS DIN EN/DIN W-Nr. BS EN/BS
NS 1402
(NS 142)
(0Cr21Ni42Mo3Cu2Ti) 		H 08825
H 01402 		NCF 825 NCF 825 Incoloy 825 N 08825 NiCr21Mo 2.4858 NA 16
3 Approximate Comparison Table
United States Germany France
Commercial Grade ASTM W-Nr. NF EN/NF
Incoloy 825 ASTM B423 2.4858 NC21FeDU
NiCr21Mo Corresponding Standards(Same grade name, different standards)
1 DIN 17750-2002
NiCr21Mo 2.4858
2 DIN 17744-2002
NiCr21Mo 2.4858
3 DIN 17752-2002
NiCr21Mo 2.4858
4 DIN 17744-2020
NiCr21Mo 2.4858

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!