Ti2Pd 3.7235 - DIN 17862-2012

Grade	Ti2Pd
Germany W-Nr.	3.7235
Corresponding Standard	DIN 17862-2012 Titanium and titanium alloy bars – Technical specification
Classification	Titanium and Titanium Alloys
Properties	Corrosion Resistance
Density	4.5 g/cm³

Ti2Pd Chemical Element Composition Content (%)

Component	Fe ^①	C	N	H ^②	O	Pd	Other Individual	Other Total	More
Minimum Value	-	-	-	-	-	0.15	-	-	Ti:余量
Maximum Value	0.2	0.06	0.05	0.013	0.18	0.25	0.1	0.4	Ti:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Ti2Pd Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar: 6 < d ≤ 100	3.7235.1	Annealing	390~540	≥250	≥22(long.)；≥20(tr.)	≥30	≈150	41(long.)；34(tr.)

Approximate Comparison Table Processing titanium and titanium alloy

China	Japan	United States	International Organization for Standardization	Germany	France	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	BS EN/BS
TA8	Class 18	Grade 16	Ti-0.05Pd(b)	Ti2Pd	T-Pd(b)	Ti-0.05Pd(b)

Ti2Pd Corresponding Standards(Same grade name, different standards)

1	DIN 17862-2012
	Ti2Pd 3.7235
2	DIN 17851-1990
	Ti2Pd 3.7235
3	DIN 17860-2010
	Ti2Pd 3.7235

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!