中文版
Home Material DIN EN 12166-2016
简体 | 繁體
Grade CuZn35Pb2
Germany W-Nr. CW601N
Corresponding Standard DIN EN 12166-2016
Copper and copper alloys – Wire for general purposes
Classification Copper and Copper Alloys
Density 8.5 g/cm3
CuZn35Pb2 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 62 1.6 - - - Zn:余量
Maximum Value 0.1 0.3 63.5 2.5 0.05 0.1 0.1
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn35Pb2 Mechanical Properties
diameter*
d
mm		 Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
1.5<d≤20 CuZn35Pb2-H080 H080 HV
80~130
1.5<d≤14 CuZn35Pb2-H100 H100 100~150
1.5<d≤8 CuZn35Pb2-H135 H135 ≥135
0.5<d≤20 CuZn35Pb2-R340 R340 ≥340 ≤280 ≥10(A100)；
≥15(A11.3)；
≥20(A)
≥10
0.5<d≤14 CuZn35Pb2-R400 R400 ≥400 ≥200 ≥4(A100)；
≥8(A11.3)；
≥12(A)
0.5<d≤8 CuZn35Pb2-R480 R480 ≥480 ≥350 ≥2(A100)；
≥5(A11.3)
All specifications CuZn35Pb2-M M No specification No specification No specification No specification
CuZn35Pb2 Corresponding Standards(Same grade name, different standards)
1 EN 12166-1998
CuZn35Pb2 CW601N
2 EN 12166-2016
CuZn35Pb2 CW601N
3 DIN EN 12166-2016
CuZn35Pb2 CW601N
4 DIN EN 12166-1998
CuZn35Pb2 CW601N
5 EN 12167-2024
CuZn35Pb2 CW601N
6 DIN EN 12449-2019
CuZn35Pb2 CW601N
7 EN 12449-2023
CuZn35Pb2 CW601N

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!