中文版
Home Material DIN EN 12166-2016
简体 | 繁體
Grade CuZn38Pb2
Germany W-Nr. CW608N
Corresponding Standard DIN EN 12166-2016
Copper and copper alloys – Wire for general purposes
Classification Copper and Copper Alloys
Density 8.4 g/cm3
CuZn38Pb2 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 60 1.6 - - - Zn:余量
Maximum Value 0.2 0.3 61 2.5 0.05 0.2 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn38Pb2 Mechanical Properties
diameter*
d
mm		 Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
1.5<d≤20 CuZn38Pb2-H080 H080 HV
80~110
1.5<d≤14 CuZn38Pb2-H100 H100 100~160
1.5<d≤8 CuZn38Pb2-H130 H130 ≥130
0.5<d≤20 CuZn38Pb2-R360 R360 ≥360 ≤300 ≥10(A100)；
≥15(A11.3)；
≥20(A)
0.5<d≤14 CuZn38Pb2-R410 R410 ≥410 ≥220 ≥8(A100)；
≥10(A11.3)；
≥12(A)
0.5<d≤8 CuZn38Pb2-R500 R500 ≥500 ≥350 ≥2(A100)；
≥5(A11.3)
All specifications CuZn38Pb2-M M No specification No specification No specification No specification
CuZn38Pb2 Corresponding Standards(Same grade name, different standards)
1 EN 12166-1998
CuZn38Pb2 CW608N
2 EN 12166-2016
CuZn38Pb2 CW608N
3 DIN EN 12166-2016
CuZn38Pb2 CW608N
4 DIN EN 12166-1998
CuZn38Pb2 CW608N
5 EN 12164-2016
CuZn38Pb2 CW608N
6 EN 12420-2014
CuZn38Pb2 CW608N
7 EN 12167-2024
CuZn38Pb2 CW608N
8 DIN EN 12449-2019
CuZn38Pb2 CW608N
9 EN 12449-2023
CuZn38Pb2 CW608N

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!