CuZn36Sn1Pb CW712R - DIN EN 12166-2016

Grade	CuZn36Sn1Pb
Germany W-Nr.	CW712R
Corresponding Standard	DIN EN 12166-2016 Copper and copper alloys – Wire for general purposes
Classification	Copper and Copper Alloys
Density	8.3 g/cm³

CuZn36Sn1Pb Chemical Element Composition Content (%)

Component	Fe	Ni	Cu	Pb	Sn	Other Total	More
Minimum Value	-	-	61	0.2	1	-	Zn:余量
Maximum Value	0.1	0.2	63	0.6	1.5	0.2	Zn:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuZn36Sn1Pb Mechanical Properties

diameter* d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
1.5<d≤20	CuZn36Sn1Pb-H085	H085				HV 85~125
1.5<d≤8	CuZn36Sn1Pb-H110	H110				110~140
0.5<d≤20	CuZn36Sn1Pb-R340	R340	≥340	≥160	≥15(A100)，≥20(A11.3)，≥25(A)
0.1<d≤8	CuZn36Sn1Pb-R400	R400	≥400	≥200	≥10(A100)，≥16(A11.3)
All specifications	CuZn36Sn1Pb-M	M	No specification	No specification	No specification	No specification

CuZn36Sn1Pb Corresponding Standards(Same grade name, different standards)

1	EN 12163-1998
	CuZn36Sn1Pb CW712R
2	EN 12166-1998
	CuZn36Sn1Pb CW712R
3	EN 12166-2016
	CuZn36Sn1Pb CW712R
4	DIN EN 12163-1998
	CuZn36Sn1Pb CW712R
5	DIN EN 12163-2016
	CuZn36Sn1Pb CW712R
6	DIN EN 12166-2016
	CuZn36Sn1Pb CW712R
7	DIN EN 12166-1998
	CuZn36Sn1Pb CW712R
8	EN 12163-2016
	CuZn36Sn1Pb CW712R
9	EN 12167-2024
	CuZn36Sn1Pb CW712R

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!