Grade CuZn30
Germany W-Nr. CW505L
Corresponding Standard DIN EN 12166-2016
Copper and copper alloys – Wire for general purposes
Classification Copper and Copper Alloys
Density 8.5 g/cm3
CuZn30 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 69 - - - - Zn:余量
Maximum Value 0.05 0.3 71 0.05 0.02 0.1 0.1
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn30 Mechanical Properties
diameter*
d
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
4<d≤20 CuZn30-H070 H070 HV
70~120
1.5<d≤20 CuZn30-H110 H110 110~140
1.5<d≤5 CuZn30-H140 H140 ≥140
1.5<d≤3 CuZn30-H165 H165 ≥165
4<d≤20 CuZn30-R280 R280 ≥280 ≤250 ≥37(A100);
≥40(A11.3);
≥43(A)
1.5<d≤20 CuZn30-R370 R370 ≥370 ≥230 ≥12(A100);
≥14(A11.3);
≥16(A)
0.5<d≤5 CuZn30-R460 R460 ≥460 ≥310 ≥4(A100);
≥7(A11.3)
0.1<d≤3 CuZn30-R550 R550 ≥550 ≥450 ≥3(A100)
All specifications CuZn30-M M No specification No specification No specification No specification
1 Approximate Comparison Table Brass
China Japan United States International Organization for Standardization Germany European Standard Russia
GB JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
H70 C2600 70Cu-30Zn C26000 CuZn30 C26000 CuZn30 C26000
2.0265
CuZn30 CW505L Л70
2 Approximate Comparison Table Copper and Copper Alloy
Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
C2600 C26000 CuZn30 CuZn30 2.0265 CuZn30 CuZn30 CW505L L70 CuZn30 CZ106

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!