中文版
Home Material DIN EN 12166-2016
简体 | 繁體
Grade CuNi18Zn19Pb1
Germany W-Nr. CW408J
Corresponding Standard DIN EN 12166-2016
Copper and copper alloys – Wire for general purposes
Classification Copper and Copper Alloys
Density 8.7 g/cm3
CuNi18Zn19Pb1 Chemical Element Composition Content (%)
Component Fe Mn Ni Cu Pb Sn Other Total More
Minimum Value - - 17 59.5 0.5 - - Zn:余量
Maximum Value 0.3 0.7 19 62.5 1.5 0.2 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuNi18Zn19Pb1 Mechanical Properties
diameter*
d
mm		 Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
1.5<d≤12 CuNi18Zn19Pb1-H115 H115 HV
115~155
1.5<d≤10 CuNi18Zn19Pb1-H135 H135 135~165
1.5<d≤8 CuNi18Zn19Pb1-H160 H160 160~190
1.5<d≤12 CuNi18Zn19Pb1-R420 R420 ≥420 ≥260 ≥12(A100)，
≥16(A11.3)，
≥20(A)
1.5<d≤10 CuNi18Zn19Pb1-R520 R520 ≥520 ≥420 ≥3(A100)，
≥5(A11.3)，
≥6(A)
1.5<d≤8 CuNi18Zn19Pb1-R650 R650 ≥650 ≥580
All specifications CuNi18Zn19Pb1-M M No specification No specification No specification No specification
Approximate Comparison Table Cupper and cupper alloy
Germany European Standard
DIN EN/DIN W-Nr. EN Numerical Grade
CuNi18Zn19Pb1 2.0790 CuNi18Zn19Pb1 CW408J
CuNi18Zn19Pb1 Corresponding Standards(Same grade name, different standards)
1 EN 12166-1998
CuNi18Zn19Pb1 CW408J
2 EN 12166-2016
CuNi18Zn19Pb1 CW408J
3 DIN 17672-1-1983
CuNi18Zn19Pb1 2.0790
4 DIN EN 12166-2016
CuNi18Zn19Pb1 CW408J
5 DIN EN 12166-1998
CuNi18Zn19Pb1 CW408J
6 EN 12167-2024
CuNi18Zn19Pb1 CW408J

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!