CuCr1Zr CW106C - DIN EN 12166-2016

Grade	CuCr1Zr
Germany W-Nr.	CW106C
Corresponding Standard	DIN EN 12166-2016 Copper and copper alloys – Wire for general purposes
Classification	Copper and Copper Alloys
Density	8.8 g/cm³

CuCr1Zr Chemical Element Composition Content (%)

Component	Fe	Si	Cr	Zr	Other Total	More
Minimum Value	-	-	0.5	0.03	-	Cu:余量
Maximum Value	0.08	0.1	1.2	0.3	0.2	Cu:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuCr1Zr Mechanical Properties

diameter* d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
2<d≤10	CuCr1Zr-H125	H125				HV 125~170
2<d≤10	CuCr1Zr-H145	H145				145~185
2<d≤10	CuCr1Zr-H160	H160				160~190
2<d≤10	CuCr1Zr-R370	R370	≥370	≥250	≥8(A100) ≥12(A11.3) ≥16(A)
2<d≤10	CuCr1Zr-R430	R430	≥430	≥350	≥5(A100) ≥8(A11.3) ≥10(A)
2<d≤10	CuCr1Zr-R470	R470	≥470	≥420	≥3(A100) ≥6(A11.3) ≥8(A)
All specifications	CuCr1Zr-M	M	No specification	No specification	No specification	No specification

CuCr1Zr Corresponding Standards(Same grade name, different standards)

1	EN 12163-1998
	CuCr1Zr CW106C
2	EN 12166-1998
	CuCr1Zr CW106C
3	EN 12166-2016
	CuCr1Zr CW106C
4	DIN EN 12163-1998
	CuCr1Zr CW106C (CuCrZr) (2.1293)
5	DIN EN 12163-2016
	CuCr1Zr CW106C
6	DIN EN 12166-2016
	CuCr1Zr CW106C
7	DIN EN 12166-1998
	CuCr1Zr CW106C
8	EN 12163-2016
	CuCr1Zr CW106C
9	EN 12167-2024
	CuCr1Zr CW106C
10	EN 12449-2023
	CuCr1Zr CW106C

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!