LF415K1 - GB /T 14383-2021

Performance Level	LF415K1
Corresponding Standard	GB /T 14383-2021 Forged Fitting, Socket-Welding and Threaded
Classification	Carbon Steel

LF415K1 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	V
Minimum Value	-	0.1	0.6	-	-	-	-	-	-	-
Maximum Value	0.3	0.4	1.05	0.025	0.02	0.3	0.4	0.4	0.12	0.08

LF415K1 Mechanical Properties

Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
≥415	≥240	≥22	≥30	≤160	-20°C；≥18

① Yield Point: For pipe fittings of the stainless steel category, the specified non-proportional elongation strength Rp0.2 is used. For pipe fittings of other material categories, when the lower yield strength ReL is not clearly defined, the specified non-proportional elongation strength Rp0.2 is used.

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!