SF316L - GB /T 14383-2021

Performance Level	SF316L
Corresponding Standard	GB /T 14383-2021 Forged Fitting, Socket-Welding and Threaded
Classification	Austenitic Stainless Steel

SF316L Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo
Minimum Value	-	-	-	-	-	16	10	2
Maximum Value	0.03	1	2	0.045	0.03	18	15	3

SF316L Mechanical Properties

Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
≥480	≥170	≥30	≥50	≤187

① Yield Point: For pipe fittings of the stainless steel category, the specified non-proportional elongation strength Rp0.2 is used. For pipe fittings of other material categories, when the lower yield strength ReL is not clearly defined, the specified non-proportional elongation strength Rp0.2 is used.

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!