AlMgSi1 F30 3.2315.72 - DIN 1747-1-1983

Grade	AlMgSi1 F30
Germany W-Nr.	3.2315.72
Corresponding Standard	DIN 1747-1-1983 Rods and bars of wrought aluminium and aluminium alloys; properties
Classification	Aluminum and Aluminum Alloys
Density	2.7 g/cm³

AlMgSi1 F30 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual	Other Total
Minimum Value	-	0.7	0.4	-	-	-	-	0.6	-	-
Maximum Value	0.5	1.3	1	0.25	0.1	0.1	0.2	1.2	0.05	0.15

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

AlMgSi1 F30 Mechanical Properties

diameter（width across flats）/thickness d/t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Bar (Round, Hexagonal, Rectangular, Square); 60<d≤200, 50<t≤100	Heat aging F30(.72)	≥300	≥240	≥8(A5)	≈95

①A5、A10-gage legth

AlMgSi1F30 Corresponding Standards(Same grade name, different standards)

1	DIN 1747-1-1983
	AlMgSi1 F30 3.2315.72
2	DIN 1745-1-1983
	AlMgSi1 F30 3.2315.72

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!