NiCr20TiAl 2.4952 - EN 10302-2008

Grade	NiCr20TiAl
European Standard Steel Grade	2.4952
Corresponding Standard	EN 10302-2008 Creep Resisting Steels,Nickel and Cobalt Alloys
Classification	Nickel and Nickel Alloys
Properties	High Strength Corrosion Resistance High-Temperature Resistance
Density	8.2 g/cm³

NiCr20TiAl Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Ni	Cu	Ti	B	Co	Al
Minimum Value	-	0.04	-	-	-	-	18	65	-	1.8	-	-	1
Maximum Value	1.5	0.1	1	1	0.02	0.015	21	-	0.2	2.7	0.008	1	1.8

NiCr20TiAl Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
-*	+P	≥1000	≥600	≥18
t≥3**	+P	≥1000	≥600	≥18

Approximate Comparison Table Deformed High-Temperature Alloy

China	United States	International Organization for Standardization	European Standard
GB	SAE	ISO	EN	Numerical Grade
GH4080A 80A①	HEV5	NiCr20TiAl	NiCr20TiAl	2.4952

NiCr20TiAl Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!