E235 1.0308 - EN 10305-1-2010

Grade	E235
European Standard Steel Grade	1.0308
Corresponding Standard	EN 10305-1-2010
Classification	Carbon Steel

E235 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Al
Minimum Value	-	-	-	-	-	0.015
Maximum Value	0.17	0.35	1.2	0.025	0.025	-

E235 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Seamless steel pipe	E235 +N	Normalizing (+N)	340~480	ⓐ ≥235	≥25
Seamless steel pipe	E235 +SR	Cold Drawing and Stress Relief (+SR)	≥420	≥350	≥16
Seamless steel pipe	E235 +A	Soft Annealed (+A)**	≥315		≥25
Seamless steel pipe	E235 +LC	Cold Finishing (+LC)*	≥420		≥10
Seamless steel pipe	E235 +C	Cold Drawn Hardening (+C)*	≥480		≥6

Approximate Comparison Table

E235 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!