SA194 Grade 16 - ASME SA-194/SA-194M-2019

Grade	SA194 Grade 16
Corresponding Standard	ASME SA-194/SA-194M-2019 Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
Classification	Alloy Steel

SA194 Grade 16 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	V	Al ^①
Minimum Value	0.36	0.15	0.45	-	-	0.8	0.5	0.25	-
Maximum Value	0.47	0.35	0.7	0.035	0.04	1.15	0.65	0.35	0.015

• The intentional addition of Bi, Se, Te, and Pb is not permitted except for Grades 6F, 8F, and 8FA, in which Se is specified and required.
• Total aluminum, soluble and insoluble.
• Because of the degree to which sulfur segregates, product analysis for sulfur over 0.060 % max is not technologically appropriate.

SA194 Grade 16 Mechanical Properties

condition	Heat Treatment or Condition	Hardness HBW
Finished Nuts	Heat Treatment	HB: 248~327 HRC: 24~35
Sample nut	Heat treatment*	HB: ≥201 HRB:≥94

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!