SA194 Grade 6F S41623 Type 416Se - ASME SA-194/SA-194M-2019

Performance Level	SA194 Grade 6F
	S41623
Other Names
Corresponding Standard	ASME SA-194/SA-194M-2019 Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance Machinability

SA194 Grade 6F Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Se
Minimum Value	-	-	-	-	-	12	0.15
Maximum Value	0.15	1	1.25	0.06	0.06	14	-

• The intentional addition of Bi, Se, Te, and Pb is not permitted except for Grades 6F, 8F, and 8FA, in which Se is specified and required.
• Total aluminum, soluble and insoluble.
• Because of the degree to which sulfur segregates, product analysis for sulfur over 0.060 % max is not technologically appropriate.

SA194 Grade 6F Mechanical Properties

Hardness HBW
228~271

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!