中文版
Home Material ASME SA-194/SA-194M-2019
简体 | 繁體
Grade SA194 Grade 6F
S41600
Other Names
Corresponding Standard ASME SA-194/SA-194M-2019
Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
Classification Martensitic Stainless Steel
Properties Corrosion Resistance Good Machinability
SA194 Grade 6F Chemical Element Composition Content (%)
Component C Si Mn P S Cr
Minimum Value - - - - 0.15 12
Maximum Value 0.15 1 1.25 0.06 - 14
• The intentional addition of Bi, Se, Te, and Pb is not permitted except for Grades 6F, 8F, and 8FA, in which Se is specified and required.
• Total aluminum, soluble and insoluble.
• Because of the degree to which sulfur segregates, product analysis for sulfur over 0.060 % max is not technologically appropriate.
SA194 Grade 6F Mechanical Properties
Hardness
HBW
HB:228~271
HRC:20~28
Approximate Comparison Table Martensitic Stainless Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade SS BS EN/BS
Y12Cr13
(Y1Cr13) 		S41617 416 SUS 416 STS 416 416 S41600 X12CrS 13 4005-416-00-I X12CrS 13 1.4005 Z12CF 13
Z11CF13 		X12CrS 13 1.4005 2380 416S21

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!