中文版
Home Material ASME SA-194/SA-194M-2019
简体 | 繁體
Grade SA194 Grade 8T
S32100
Other Names
Corresponding Standard ASME SA-194/SA-194M-2019
Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
Classification Austenitic Stainless Steel
Properties Corrosion Resistance High-Temperature Strength
SA194 Grade 8T Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni N More
Minimum Value - - - - - 17 9 - Ti：5×(C+N)~0.70
Maximum Value 0.08 1 2 0.045 0.03 19 12 0.1
• The intentional addition of Bi, Se, Te, and Pb is not permitted except for Grades 6F, 8F, and 8FA, in which Se is specified and required.
• Total aluminum, soluble and insoluble.
• Because of the degree to which sulfur segregates, product analysis for sulfur over 0.060 % max is not technologically appropriate.
SA194 Grade 8T Mechanical Properties
Hardness
HBW
126~300
1 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
06Cr18Ni11Ti S32168 321 SUS 321 STS 321 321 S32100 X6CrNiTi 18-10 4541-321-00-I X6CrNiTi 18-10
(X10CrNiTi 18-9) 		1.4541 Z6CNT 18-10 X6CrNiTi 18-10 1.4541 09Х18Н10Т
Х18Н10Т 		2337 321S12
321S31
2 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
06Cr18Ni11Ti
(0Cr18Ni11Ti) 		S32168 321 SUS 321 STS 321 321 S32100 X6CrNiTi 18-10 X6CrNiTi 18-10
(X10CrNiTi 18-9) 		1.4541 Z6CNT 18-10 X6CrNiTi 18-10 1.4541 09Х18Н10Т 2337 321S12
321S31
3 Approximate Comparison Table
China Japan United States International Organization for Standardization Germany France Russia United Kingdom
GB JIS ASTM/AISI UNS ISO DIN EN/DIN NF EN/NF GOST BS EN/BS
0Cr18Ni11Ti
0Cr18Ni9Ti 		SUS321 321 S32100 15 X10CrNiTi18-9 Z6CNT18.10 08Х18Н10Т 321S12
321S20
4 Approximate Comparison Table Stainless steels for cold heading and cold extruding
China Japan United States International Organization for Standardization European Standard
GB ISC JIS ASTM/AISI UNS ISO Numerical Grade EN Numerical Grade
06Cr18Ni11Ti
(0Cr18Ni11Ti) 		S32168 SUS321 321 S32100 X6CrNiTi18-10 4541-321-00-I X6CrNiTi18-10 1.4541

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!