P265TR2 1.0259 - NF EN 10253-2-2007

Grade	P265TR2
	1.0259
Corresponding Standard	NF EN 10253-2-2007 Butt-welding pipe fittings- Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
Classification	Carbon Steel

P265TR2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr ^①	Ni ^①	Cu ^①	Mo ^①	Ti ^①	V ^①	Nb ^①	Al ^②	More
Minimum Value	-	-	-	-	-	-	-	-	-	-	-	-	0.02	Cr+Cu+Mo+Ni ≤ 0.7
Maximum Value	0.2	0.4	1.4	0.025	0.02	0.3	0.3	0.3	0.08	0.04	0.02	0.01	-	Cr+Cu+Mo+Ni ≤ 0.7

P265TR2 Mechanical Properties

thickness T mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
T ≤ 16	+N	410~570	≥265	l: ≥ 21; t: ≥ 19	0℃：l: ≥ 40; t: ≥ 27
16＜T ≤ 40	+N	410~570	≥255	l: ≥ 21; t: ≥ 19	0℃：l: ≥ 40; t: ≥ 27
40＜T ≤ 60	+N	410~570	≥245	l: ≥ 21; t: ≥ 19	0℃：l: ≥ 40; t: ≥ 27

P265TR2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!