16Mo3 1.5415 - NF EN 10253-2-2007

Grade	16Mo3
	1.5415
Corresponding Standard	NF EN 10253-2-2007 Butt-welding pipe fittings- Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
Classification	Alloy Steel

16Mo3 Chemical Element Composition Content (%)

Component	C ^①	Si	Mn	P	S	Cr	Ni	Cu	Mo	Al
Minimum Value	0.12	-	0.4	-	-	-	-	-	0.25	-
Maximum Value	0.2	0.35	0.9	0.025	0.02	0.3	0.3	0.3	0.35	0.04

16Mo3 Mechanical Properties

thickness T mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
T ≤ 16	+N	450~600	≥280	l: ≥ 22; t: ≥ 20	20℃：l: ≥ 40; t: ≥ 27
16＜T ≤ 40	+N	450~600	≥270	l: ≥ 22; t: ≥ 20	20℃：l: ≥ 40; t: ≥ 27
40＜T ≤ 60	+N	450~600	≥260	l: ≥ 22; t: ≥ 20	20℃：l: ≥ 40; t: ≥ 27

16Mo3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!