Grade TU1
T10150
Corresponding Standard YS /T 649-2018
Extruded Rod and Bar of Copper and Copper Alloys
Classification Copper and Copper Alloys
TU1 Chemical Element Composition Content (%)
Component Fe P S Ni Cu As Pb Zn Sn Bi Sb O
Minimum Value - - - - 99.97 - - - - - - -
Maximum Value 0.004 0.002 0.004 0.002 - 0.002 0.003 0.003 0.002 0.001 0.002 0.002
• The chemical composition of H96 and HSn61-0.8-1.8 rod materials shall comply with the provisions of this standard. The chemical composition of other grade rod materials shall comply with the corresponding provisions of GB/T 5231-2012.
TU1 Mechanical Properties
diameter
d
mm
Tensile Strength
σb
Mpa
Elongation or Extension Rate
δ
%
d≤120 ≥186 ≥40
Note: The mechanical properties of rod materials exceeding the specified dimensions shall be provided as actual test values or determined by agreement between the supplier and the customer.
TU1 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!