X3CrNiMoN 27-5-2 1.4460 - EN 10250-4-1999

Grade	X3CrNiMoN 27-5-2
European Standard Steel Grade	1.4460
Corresponding Standard	EN 10250-4-1999
Classification	Duplex Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X3CrNiMoN 27-5-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^*	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	25	4.5	1.3	0.05
Maximum Value	0.05	1	2	0.035	0.03	28	6.5	2	0.2

* For products to be machined a controlled sulfur content of 0.015% to 0.030% is recommended.

X3CrNiMoN 27-5-2 Mechanical Properties

diameter t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤160*	Solid Solution Annealing	620~880	≥460	longitudinal: ≥20 transverse: ≥15	longitudinal: ≥85 transverse: ≥50

Approximate Comparison Table

China		United States	International Organization for Standardization		Germany		France	European Standard
GB	ISC	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade
022Cr25Ni6Mo2N	S22553	S31200	X3CrNiMoN 27-5-2	4460-312-00-I	X3CrNiMoN 27-5-2	1.4460	X3CrNiMoN 27-5-2	X3CrNiMoN 27-5-2	1.4460

X3CrNiMoN27-5-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!