HC260I - Q/BQB 419-2021

Grade	HC260I
Corresponding Standard	Q/BQB 419-2021 Cold Rolled Conventional High Strength Steel Sheet and Strip
Classification	Carbon Steel

HC260I Chemical Element Composition Content (%)

Component	C	Mn	P	S	Al
Minimum Value	-	-	-	-	0.015
Maximum Value	0.08	1.2	0.1	0.02	-

HC260I Mechanical Properties

Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
320~420	260~300	≥32(A80)

ⓐ A50、A80-gauge length；t-nominal thickness/mm
• When the yield phenomenon is not obvious, Rp0.2 is used; otherwise, ReL is adopted

Approximate Comparison Table Cold-Formable High Yield Strength Steel

HC260I Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!