Grade CuSn6
Germany W-Nr. CW452K
Corresponding Standard DIN EN 12166-2016
Copper and copper alloys – Wire for general purposes
Classification Copper and Copper Alloys
Density 8.8 g/cm3
CuSn6 Chemical Element Composition Content (%)
Component Fe P Ni Pb Zn Sn Other Total More
Minimum Value - 0.01 - - - 5.5 - Cu:余量
Maximum Value 0.1 0.4 0.2 0.02 0.2 7 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuSn6 Mechanical Properties
diameter*
d
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
Wire; 1.5<d≤20 CuSn6-H085 H085 HV
85~115
Wire rod; 1.5<d≤12 CuSn6-H125 H125 125~165
Wire; 1.5<d≤8 CuSn6-H155 H155 155~190
Wire Material; 1.5<d≤4 CuSn6-H190 H190 190~225
Wire CuSn6-H245 H245 ≥245
Wire; 1.5<d≤20 CuSn6-R340 R340 ≥340 ≤270 ≥35(A100);
≥40(A11.3);
≥45(A)
Wire material; 0.1<d≤12 CuSn6-R420 R420 ≥420 ≥220 ≥20(A100);
≥25(A11.3);
≥30(A)
Wire; 0.1<d≤8 CuSn6-R520 R520 ≥520 ≥400 ≥3(A100);
≥5(A11.3)
Wire; 0.1<d≤4 CuSn6-R700 R700 ≥700 ≥600
Wire; 0.1<d≤1.5 CuSn6-R900 R900 ≥900 ≥800
All specifications CuSn6-M M No specification No specification No specification No specification
1 Approximate Comparison Table bronze
China United States International Organization for Standardization Germany Russia
GB ISC ASTM ISO DIN EN/DIN GOST
QSn6.5-0.4 T51520 94Cu-6Sn-.4P CuSn6 CuSn6 БрОФ6.5-0.4
2 Approximate Comparison Table Cupper and cupper alloy
Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
C5191 C51900 CuSn6 CuSn6 2.1020 CuSn6P CuSn6 CW452K BrOF6.5-0.15 CuSn6 PB102

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!