X1CrNiMoCuN20-18-7 1.4547 - NF EN 10088-1-2005

Grade	X1CrNiMoCuN20-18-7
	1.4547
Corresponding Standard	NF EN 10088-1-2005 Stainless steels — Part 1: List of stainless steels
Classification	Austenitic Stainless Steel
Density	8 g/cm³

X1CrNiMoCuN20-18-7 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^①	Mo	N
Minimum Value	-	-	-	-	-	19.5	17.5	0.5	6	0.18
Maximum Value	0.02	0.7	1	0.03	0.01	20.5	18.5	1	7	0.25

◎ Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

X1CrNiMoCuN20-18-7 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X1CrNiMoCuN 20-18-7 1.4547
2	EN 10253-4-2003
	X1CrNiMoCuN20-18-7 1.4547
3	EN 10250-4-1999
	X1CrNiMoCuN 20-18-7 1.4547
4	ISO TS 15510-2003
	X1CrNiMoCuN20-18-7
5	EN 10088-3-2005
	X1CrNiMoCuN 20-18-7 1.4547
6	EN 10088-3-2014
	X1CrNiMoCuN 20-18-7 1.4547
7	ISO 15510-2014
	X1CrNiMoCuN20-18-7 4547-312-54-I
8	ISO 9328-7-2018
	X1CrNiMoCuN20-18-7
9	DIN EN 10088-3-2014
	X1CrNiMoCuN 20-18-7 1.4547
10	NF EN 10088-2-2005
	X1CrNiMoCuN20-18-7 1.4547
11	NF EN 10088-1-2005
	X1CrNiMoCuN20-18-7 1.4547
12	NF EN 10028-7-2008
	X1CrNiMoCuN20-18-7 1.4547
13	NF EN 10296-2-2005
	X1CrNiMoCuN20-18-7 1.4547
14	NF EN 10028-7-2000
	X1CrNiMoCuN20-18-7 1.4547
15	DIN EN 10296-2-2006
	X1CrNiMoCuN20-18-7 1.4547

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!