X2NiCrAITi32-20 1.4558 - NF EN 10088-1-2005

Grade	X2NiCrAITi32-20
	1.4558
Corresponding Standard	NF EN 10088-1-2005 Stainless Steels — Part 1: List of Stainless Steels
Classification	Austenitic Stainless Steel
Density	8 g/cm³

X2NiCrAITi32-20 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Al	More
Minimum Value	-	-	-	-	-	20	32	0.15	Ti: [8×(C+N)]~0.6
Maximum Value	0.03	0.7	1	0.02	0.015	23	35	0.45	Ti: [8×(C+N)]~0.6

◎ Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!