中文版
Home/ Material/ DIN EN 12163-1998
简体 | 繁體
Grade CuAl10Fe3Mn2
Germany W-Nr. CW306G
Old Grade
Corresponding Standard DIN EN 12163-1998
Copper and copper alloys – Rod for general purposes
Classification Copper and Copper Alloys
Density 7.6 g/cm3
CuAl10Fe3Mn2 Chemical Element Composition Content (%)
Component Fe Si Mn Ni Pb Al Zn Sn Other Total More
Minimum Value 2 - 1.5 - - 9 - - - Cu:余量
Maximum Value 4 0.2 3.5 1 0.05 11 0.5 0.1 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuAl10Fe3Mn2 Mechanical Properties
diameter/width across-flats
d
mm		 Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
10<d≤80 CuAl10Fe3Mn2-R590 R590 ≥590 ≈330* ≥12(A)
10<d≤80 CuAl10Fe3Mn2-H140 H140 HB: 140~180；
HV: 145~185
10<d≤50 CuAl10Fe3Mn2-R690 R690 ≥690 ≈510* ≥6(A)
10<d≤50 CuAl10Fe3Mn2-H170 H170 HB: ≥170；
HV: ≥180
10<d≤80 CuAl10Fe3Mn2-M M No specification No specification No specification No specification
New and Old Grade Replacement List
Corresponding Standard Grade
DIN 17672-1-1983
Grade
Germany W-Nr.
Old Grade
DIN EN 12163-1998
Grade
Germany W-Nr.
Old Grade
1 Approximate Comparison Table Bronze
China Japan United States International Organization for Standardization Germany European Standard Russia
GB ISC JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
QAl10-3-1.5 T61760 C6161
C61600 		85Cu-10Al-3Fe-2Mn C61600 CuAl10Fe3Mn2 C61600 CuAl10Fe3Mn2 2.0936
C61600 		CuAl10Fe3Mn2 CW306G БрАЖМц10-3-1.5
2 Approximate Comparison Table Copper and Copper Alloy
International Organization for Standardization Germany European Standard Russia
ISO DIN EN/DIN W-Nr. EN Numerical Grade GOST
CuAl10Fe3 CuAl10Fe3Mn2 2.0936 CuAl10Fe3Mn2 CW306G BrAZHMts10-3-1.5
CuAl10Fe3Mn2 Corresponding Standards(Same grade name, different standards)
1 EN 12163-1998
CuAl10Fe3Mn2 CW306G
2 DIN 17672-1-1983
CuAl10Fe3Mn2 2.0936 (CuAl10Fe)
3 DIN EN 12163-1998
CuAl10Fe3Mn2 CW306G (2.0936)
4 DIN 17671-1-1983
CuAl10Fe3Mn2 2.0936 (CuAl10Fe)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!