X10NiCrSi35-19 1.4886 - NF EN 10088-1-2005

Grade	X10NiCrSi35-19
	1.4886
Corresponding Standard	NF EN 10088-1-2005 Stainless steels — Part 1: List of stainless steels
Classification	Austenitic Stainless Steel
Density	8 g/cm³

X10NiCrSi35-19 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	1	-	-	-	17	33	-
Maximum Value	0.15	2	2	0.03	0.015	20	37	0.11

◎ Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Corrosion-Resistant Alloy

China		United States	International Organization for Standardization	Germany		France	European Standard		Sweden
GB	ISC	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	SS
NS 1105	H 08330	N 08330	X 6 NiCrSi 36-19	X10NiCrSi 35-19	1.4886	X10NiCrSi 35-19	X10NiCrSi 35-19	1.4886	X10NiCrSi 35-19

X10NiCrSi35-19 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X10NiCrSi 35-19 1.4886
2	DIN EN 10095-2018
	X10NiCrSi 35-19 1.4886
3	NF EN 10088-1-2005
	X10NiCrSi35-19 1.4886

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!