Cu-FRTP CW006A - EN 12163-1998

Grade	Cu-FRTP
European Standard Steel Grade	CW006A
Corresponding Standard	EN 12163-1998 Copper and copper alloys — Rod for general purposes
Classification	Copper and Copper Alloys
Density	8.9 g/cm³

Cu-FRTP Chemical Element Composition Content (%)

Component	Cu ^①	Ag ^①②	O ^②	Other Total ^②
Minimum Value	99.9	-	-	-
Maximum Value	-	0.015	0.1	0.05

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Cu-FRTP Mechanical Properties

diameter/width across-flats d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
2<d≤80	Cu-FRTP-R200	Annealing; R200	≥200	≈80*	≥25(A100)， ≥30(A11.3)， ≥35(A)
2<d≤80	Cu-FRTP-H035	Annealing; H035				HB: 35~65； HV: 35~65
2<d≤10	Cu-FRTP-R250	R250	≥250	≈220*	≥8(A100)， ≥10(A11.3)， ≥12(A)
10<d≤30		R250	≥250	≈210*	≥15(A)
30<d≤80	Cu-FRTP-R230	R230	≥230	≈190*	≥18(A)
2<d≤80	Cu-FRTP-H065	H065				HB: 65~90； HV: 70~95
2<d≤20	Cu-FRTP-R300	R300	≥300	≈280*	≥5(A100)， ≥6(A11.3)， ≥8(A)
20<d≤40	Cu-FRTP-R280	R280	≥280	≈260*	≥10(A)
2<d≤40	Cu-FRTP-H085	H085				HB: 85~110； HV: 90~115
40<d≤80	Cu-FRTP-R260	R260	≥260	≈230*	≥12(A)
40<d≤80	Cu-FRTP-H075	H075				HB: 75~100； HV: 80~105
2<d≤10	Cu-FRTP-R350	R350	≥350	≈330*	≥3(A100)， ≥4(A11.3)， ≥5(A)
2<d≤10	Cu-FRTP-H100	H100				HB: ≥100； HV: ≥110
2<d≤80	Cu-FRTP-M	M	No specification	No specification	No specification	No specification

① Material condition names and designations:
H - Hardness (Brinell hardness or Vickers hardness), with the suffix number indicating the hardness value.
R - Tensile strength, with the suffix number indicating the minimum tensile strength value.
M - Manufactured without specified mechanical properties. Refer to standard EN 1173-2008.
② A100, A11.3, A - Gauge length.

Approximate Comparison Table Processing Pure Copper, Silver Copper

China		Japan	United States		International Organization for Standardization		France	European Standard	Russia	Sweden
GB	ISC	JIS	ASTM	UNS	ISO	Numerical Grade	NF EN/NF	EN	GOST	SS
T3	T11090	C1221 Cu99.75	99.88Cu	C12500	Cu-FRTP	C12500	Cu-FRTP C12500	Cu-FRTP	М2	5013-10 C12500

Cu-FRTP Corresponding Standards(Same grade name, different standards)

1	EN 12163-1998
	Cu-FRTP CW006A
2	DIN EN 12163-1998
	Cu-FRTP CW006A

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!