Grade CuZn37
European Standard Steel Grade CW508L
Corresponding Standard EN 12163-2016
Copper and copper alloys - Rod for general purposes
Classification Copper and Copper Alloys
Density 8.4 g/cm3
CuZn37 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 62 - - - - Zn:余量
Maximum Value 0.1 0.3 64 0.1 0.05 0.1 0.1
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn37 Mechanical Properties
diameter/width arcoss-flats
d/t
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
4<d/t≤80 CuZn37-R290 R290 ≥290 ≤230 ≥40(A11.3),
≥45(A)
4<d/t≤80 CuZn37-H070 H070 70~110
4<d≤40;4<t≤35 CuZn37-R370 R370 ≥370 ≥240 ≥12(A11.3),
≥14(A)
4<d≤40;4<t≤35 CuZn37-H105 H105 105~145
4<d≤8;4<t≤6 CuZn37-R460 R460 ≥460 ≥330 ≥6(A11.3),
≥8(A)
4<d≤8;4<t≤6 CuZn37-H140 H140 ≥140
All specifications CuZn37-M M No specification No specification No specification No specification
1 Approximate Comparison Table brass
China Japan United States International Organization for Standardization Germany European Standard Russia
GB JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
H63 C2720 63Cu-37Zn C27200 CuZn37 C27200 CuZn37 C27200
2.0321
CuZn37 CW508L Л63
2 Approximate Comparison Table Cupper and cupper alloy
Japan United States International Organization for Standardization Germany European Standard Russia Sweden United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. EN Numerical Grade GOST SS BS EN/BS
C2720 C27400 CuZn37 CuZn36
CuZn37
2.0335 CuZn36 CW507L l63 CuZn37 CZ108
3 Approximate Comparison Table Cupper and cupper alloy
Germany European Standard
DIN EN/DIN W-Nr. EN Numerical Grade
CuZn37 2.0321 CuZn37 CW508L

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!