CuZn42 CW510L - EN 12163-2016

Grade	CuZn42
European Standard Steel Grade	CW510L
Corresponding Standard	EN 12163-2016 Copper and copper alloys - Rod for general purposes
Classification	Copper and Copper Alloys
Density	8.4 g/cm³

CuZn42 Chemical Element Composition Content (%)

Component	Fe	Ni	Cu	Pb	Al	Sn	Other Total	More
Minimum Value	-	-	57	-	-	-	-	Zn:余量
Maximum Value	0.3	0.3	59	0.2	0.05	0.3	0.2	Zn:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuZn42 Mechanical Properties

diameter/width arcoss-flats d/t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
6<d≤80;5<t≤60	CuZn42-R360	R360	≥360	≤320	≥15(A11.3)， ≥20(A)
6<d≤80;5<t≤60	CuZn42-H090	H090				90~125
2<d≤40;2<t≤35	CuZn42-R430	R430	≥430	≥220	≥6(A100)， ≥8(A11.3)， ≥10(A)
2<d≤40;2<t≤35	CuZn42-H110	H110				110~160
2<d≤14;2<t≤10	CuZn42-R500	R500	≥500	≥350	≥3(A11.3)， ≥5(A)
2<d≤14;2<t≤10	CuZn42-H135	H135				≥135
All specifications	CuZn42-M	M	No specification	No specification	No specification	No specification

CuZn42 Corresponding Standards(Same grade name, different standards)

1	EN 12166-2016
	CuZn42 CW510L
2	DIN EN 12163-2016
	CuZn42 CW510L
3	DIN EN 12166-2016
	CuZn42 CW510L
4	EN 12163-2016
	CuZn42 CW510L
5	EN 12420-2014
	CuZn42 CW510L
6	EN 12167-2024
	CuZn42 CW510L

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!