中文版
Home Material EN 12166-1998
简体 | 繁體
Grade CuZn35Pb2
European Standard Steel Grade CW601N
Corresponding Standard EN 12166-1998
Classification Copper and Copper Alloys
Density 8.5 g/cm3
CuZn35Pb2 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 62 1.6 - - - Zn:余量
Maximum Value 0.1 0.3 63.5 2.5 0.05 0.1 0.1
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn35Pb2 Mechanical Properties
diameter③
d
mm		 Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
0.5≤d≤1.5 CuZn35Pb2-R380 1/2 Hard; R380 ≥380 ≈200*
1.5<d≤8 CuZn35Pb2-R380 1/2 Hard; R380 ≥380 ≈200* ≥18(A100)；
≥20(A11.3)
1.5≤d≤8 CuZn35Pb2-H120 1/2 Hard; H120 HV: 120~150
8<d≤20 CuZn35Pb2-R370 1/2 Hard; R370 ≥370 ≈200*
8<d≤20 CuZn35Pb2-H110 1/2 Hard; H110 HV: 110~140
0.5≤d≤1.5 CuZn35Pb2-R450 Hard; R450 ≥450 ≈320*
1.5<d≤4 CuZn35Pb2-R450 Hard; R450 ≥450 ≈320* ≥6(A100)
1.5≤d≤4 CuZn35Pb2-H155 Hard; H155 HV: 155~185
4<d≤8 CuZn35Pb2-R450 Hard; R450 ≥450 ≈320* ≥10(A11.3)
4<d≤8 CuZn35Pb2-H145 Hard; H145 HV: 145~175
8<d≤14 CuZn35Pb2-R440 Hard; R440 ≥440 ≈320* ≥15(A)
8<d≤14 CuZn35Pb2-H140 Hard; H140 HV: 140~170
0.5≤d≤4 CuZn35Pb2-R540 Tough Hard; R540 ≥540 ≈480*
1.5≤d≤4 CuZn35Pb2-H165 Tough and Hard; H165 ≥165
All specifications CuZn35Pb2-M M No specification No specification No specification No specification
①Material condition designation: H-Hardness (Brinell or Vickers), the suffix number indicates the hardness value; R-Tensile strength, the suffix number indicates the minimum tensile strength; M-As manufactured, without specified mechanical properties
②A100, A11.3, A-gauge length
③Or equivalent cross-sectional area for polygonal wire.
Approximate Comparison Table Cupper and cupper alloy
Japan United States International Organization for Standardization Germany France European Standard Russia United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST BS EN/BS
C3501 C34000 CuZn35Pb1 CuZn36Pb1.5 2.0331 CuZn35Pb2 CuZn35Pb1 CW600N LS63-3 CZ118
CuZn35Pb2 Corresponding Standards(Same grade name, different standards)
1 EN 12166-1998
CuZn35Pb2 CW601N
2 EN 12166-2016
CuZn35Pb2 CW601N
3 DIN EN 12166-2016
CuZn35Pb2 CW601N
4 DIN EN 12166-1998
CuZn35Pb2 CW601N
5 EN 12167-2024
CuZn35Pb2 CW601N
6 DIN EN 12449-2019
CuZn35Pb2 CW601N
7 EN 12449-2023
CuZn35Pb2 CW601N

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!