Cu-DHP CW024A - EN 12166-1998

Grade	Cu-DHP
European Standard Steel Grade	CW024A
Corresponding Standard	EN 12166-1998 Copper and copper alloys — Wire for general purposes
Classification	Copper and Copper Alloys
Density	8.9 g/cm³

Cu-DHP Chemical Element Composition Content (%)

Component	P	Cu ^*	Ag
Minimum Value	0.015	99.9	-
Maximum Value	0.04	-	0.015

Cu-DHP Mechanical Properties

diameter d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
1.5≤d≤20	CW024A-R200	R200	200~270	≈60*	≥33(A100)； ≥37(A11.3)； ≥40(A)	-
1.5≤d≤20	CW024A-H040	H040	-	-	-	HV: 40~70
1≤d≤8	CW024A-R270	R270	≥270	≈250*	≥10(A100)； ≥12(A11.3)；	-
1≤d≤8	CW024A-H065	H065	-	-	-	HV: 65~90
8<d≤20	CW024A-R250	R250	≥250	≈230*	≥15(A)	-
8<d≤20	CW024A-	H065	-	-	-	HV: 65~90
1≤d≤8	CW024A-R330	R330	≥330	≈290*	≥4(A100)； ≥7(A11.3)；	-
1≤d≤8	CW024A-H090	H090	-	-	-	HV: 90~105
8<d≤15	CW024A-R300	R300	≥300	≈250*	≥10(A)	-
8<d≤15	CW024A-H090	H090	-	-	-	HV: 90~105
1≤d≤8	CW024A-R400	R400	≥400	≈380*	-	-
1≤d≤8	CW024A-H105	H105	-	-	-	HV: ≥105
8<d≤12	CW024A-R350	R350	≥350	≈320*	-	-
8<d≤12	CW024A-H105	H105	-	-	-	≥105
All specifications	CW024A-M	M	No specification	No specification	No specification	No specification

①Material condition designation: H-Hardness (Brinell or Vickers), the suffix number indicates the hardness value; R-Tensile strength, the suffix number indicates the minimum tensile strength; M-As manufactured, without specified mechanical properties
②A100, A11.3, A-gauge length
③Or equivalent cross-sectional area for polygonal wire.

1 Approximate Comparison Table Processing Pure Copper, Silver Copper

China	Japan	United States		International Organization for Standardization		Germany		France	European Standard		Russia
GB	JIS	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST
TP2	C1220 C12200	99.85Cu	C12200	Cu-DHP	C12200	Cu-DHP (SF-Cu)	CW024A (2.0090)	Cu-DH C12200	Cu-DHP	CW024A	М1Ф

2 Approximate Comparison Table Copper and Copper Alloy

Germany		European Standard		Russia
DIN EN/DIN	W-Nr.	EN	Numerical Grade	GOST
SF-Cu	2.0090	Cu-DHP	CW024A	M1f

Cu-DHP Corresponding Standards(Same grade name, different standards)

1	EN 12163-1998
	Cu-DHP CW024A
2	EN 12166-1998
	Cu-DHP CW024A
3	EN 12452-1999
	Cu-DHP CW024A
4	EN 12451-1999
	Cu-DHP CW024A
5	DIN EN 12163-1998
	Cu-DHP CW024A (SF-Cu) (2.0090)
6	DIN EN 12166-1998
	Cu-DHP CW024A
7	DIN EN 12449-2019
	Cu-DHP CW024A
8	EN 12449-2023
	Cu-DHP CW024A

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!