X6CrNiTiB 18-10 1.4941 - EN 10302-2008

Grade	X6CrNiTiB 18-10
European Standard Steel Grade	1.4941
Corresponding Standard	EN 10302-2008 Creep resisting steels,nickel and cobalt alloys
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

X6CrNiTiB 18-10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	B	More
Minimum Value	0.04	-	-	-	-	17	9	0.0015	Ti：5C~0.80
Maximum Value	0.08	1	2	0.035	0.015	19	12	0.005	Ti：5C~0.80

X6CrNiTiB 18-10 Mechanical Properties

diameter/width d/b mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
d≤160*	+AT	490~680	≥195	≥35
0.5≤b＜3***	+AT	490~680	≥195	≥30
b≥3**	+AT	490~680	≥195	≥35

Approximate Comparison Table Austenitic Stainless Steel

China

Taiwan, China

Japan

South Korea

United States

International Organization for Standardization

Germany

France

European Standard

Russia

Sweden

United Kingdom

ISC

CNS

JIS

ASTM

UNS

ISO

Numerical Grade

DIN EN/DIN

W-Nr.

NF EN/NF

Numerical Grade

GOST

BS EN/BS

07Cr19Ni11Ti
(1Cr18Ni11Ti)

S32169

321 HTP

SUS 321 HTP
SUS 321 H

STS 321 HTP

321H

S32109

X7CrNiTi 18-10
X6CrNiTiB 18-10

4940-321-09-I

X12CrNiTi 18-9

1.4878

Z6CNT 18-12

X8CrNiTi 18-10
X6CrNiTiB 18-10

1.4878
1.4941
1.4940

12Х18Н10Т

2337

321S20

X6CrNiTiB18-10 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X6CrNiTiB 18-10 1.4941
2	EN 10269-2006
	X6CrNiTiB18-10 1.4941
3	EN 10302-2008
	X6CrNiTiB 18-10 1.4941
4	ISO TS 15510-2003
	X6CrNiTiB18-10
5	EN 10269-2013
	X6CrNiTiB 18-10 1.4941
6	ISO 15510-2014
	X6CrNiTiB18-10 4941-321-09-I
7	NF EN 10269-1999
	X6CrNiTiB18-10 1.4941
8	DIN EN 10269-2014
	X6CrNiTiB 18-10 1.4941
9	ISO 9328-7-2018
	X6CrNiTiB18-10
10	NF EN 10088-1-2005
	X6CrNiTiB18-10 1.4941
11	NF EN 10028-7-2008
	X6CrNiTiB18-10 1.4941
12	NF EN 10028-7-2000
	X6CrNiTiB18-10 1.4941

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!