CA104 - BS 2874-1986

Grade	CA104
Corresponding Standard	BS 2874-1986 Copper and Copper Alloy Rods and Sections (Other Than Forging Stock)
Classification	Copper and Copper Alloys

CA104 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Ni	Pb	Al	Zn	Sn	Other Total ^*	More
Minimum Value	4	-	-	4	-	8.5	-	-	-	Cu:余量
Maximum Value	5.5	0.2	0.5	5.5	0.05	11	0.4	0.1	0.5	Cu:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CA104 Mechanical Properties

size d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
6＜d≤18	CA104-M	Manufacturing State (M)	≥700	≥400	≥10
18＜d≤80		Manufacturing State (M)	≥700	≥370	≥12
d＞80		Manufacturing State (M)	≥650	≥320	≥12

Approximate Comparison Table Copper and Copper Alloy

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	United Kingdom
JIS	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
C6301	C63000	CuAl10Ni5Fe4	CuAl10Ni5Fe4	2.0966	CuAl9Ni5Fe3	CuAl10Ni5Fe4	CW307G	BrAZHN10-4-4	CA104

CA104 Corresponding Standards(Same grade name, different standards)

1	BS 2874-1986
	CA104
2	BS 2870-1980
	CA104

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!