CuZn35Pb1.5AlAs CW625N - EN 12420-2014

Grade	CuZn35Pb1.5AlAs
European Standard Steel Grade	CW625N
Corresponding Standard	EN 12420-2014 Copper and Copper Alloys - Forgings
Classification	Copper and Copper Alloys
Density	8.4 g/cm³

CuZn35Pb1.5AlAs Chemical Element Composition Content (%)

Component	Fe	Mn	Ni	Cu	As	Pb	Al	Sn	Other Total	More
Minimum Value	-	-	-	62	0.02	1.2	0.5	-	-	Zn:余量
Maximum Value	0.3	0.1	0.2	64	0.15	1.6	0.7	0.3	0.2	Zn:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuZn35Pb1.5AlAs Mechanical Properties

condition	Mark	Heat Treatment or Condition	Hardness HBW
Forged product (Group I)	CW625N-M	Manufacturing State (M)	No specification
Forged product (Group I)	CW625N-H060	Hardness (H060)	≥60

CuZn35Pb1.5AlAs Corresponding Standards(Same grade name, different standards)

1	EN 12420-2014
	CuZn35Pb1.5AlAs CW625N
2	EN 12167-2024
	CuZn35Pb1.5AlAs CW625N

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!