CuZn19Sn CW701R - EN 12166-1998

Grade	CuZn19Sn
European Standard Steel Grade	CW701R
Corresponding Standard	EN 12166-1998 Copper and copper alloys — Wire for general purposes
Classification	Copper and Copper Alloys
Density	8.6 g/cm³

CuZn19Sn Chemical Element Composition Content (%)

Component	Fe	Ni	Cu	Pb	Sn	Other Total	More
Minimum Value	-	-	80	-	0.2	-	Zn:余量
Maximum Value	0.05	0.3	82	0.05	0.5	0.2	Zn:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuZn19Sn Mechanical Properties

diameter③ d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
0.1≤d≤0.5	CuZn19Sn-R330	R330	330~420		≥30(A100)
0.5<d≤1.5	CuZn19Sn-R310	R310	310~400		≥30(A100)
1.5<d≤4	CuZn19Sn-R310	R310	310~400		≥35(A100)
1.5≤d≤4	CuZn19Sn-H080	H080				HV: 80~110
4<d≤20	CuZn19Sn-R290	R290	290~380		≥6(A11.3)； ≥8(A)
4<d≤20	CuZn19Sn-H070	H070				HV: 70~100
0.1≤d≤0.5	CuZn19Sn-R850	R850	≥850
All specifications	CuZn19Sn-M	M	No specification	No specification	No specification	No specification

①Material condition designation: H-Hardness (Brinell or Vickers), the suffix number indicates the hardness value; R-Tensile strength, the suffix number indicates the minimum tensile strength; M-As manufactured, without specified mechanical properties
②A100, A11.3, A-gauge length
③Or equivalent cross-sectional area for polygonal wire.

CuZn19Sn Corresponding Standards(Same grade name, different standards)

1	EN 12166-1998
	CuZn19Sn CW701R
2	DIN EN 12166-1998
	CuZn19Sn CW701R

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!