CuZn38Pb1 CW607N - EN 12420-2014

Grade	CuZn38Pb1
European Standard Steel Grade	CW607N
Corresponding Standard	EN 12420-2014 Copper and copper alloys - Forgings
Classification	Copper and Copper Alloys
Density	8.4 g/cm³

CuZn38Pb1 Chemical Element Composition Content (%)

Component	Fe	Ni	Cu	Pb	Al	Sn	Other Total	More
Minimum Value	-	-	60	0.8	-	-	-	Zn:余量
Maximum Value	0.2	0.3	61	1.6	0.05	0.2	0.2	Zn:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuZn38Pb1 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Hardness HBW
Forged product (Group I)	CW607N-M	Manufacturing State (M)	No specification
Forged product (Group I)	CW607N-H070	Hardness (H070)	≥70

1 Approximate Comparison Table Brass

China		United States		International Organization for Standardization		European Standard		Russia	Sweden	Australia
GB	ISC	ASTM	UNS	ISO	Numerical Grade	EN	Numerical Grade	GOST	SS	Australian Standard AS
HPb61-1	C37100	61Cu-38Zn-1Pb	C37000	CuZn38Pb1	C37000	CuZn38Pb1	CW607N	ЛС61-1	5165-00 C37000	370C C37000

2 Approximate Comparison Table Copper and Copper Alloy

Japan	United States	International Organization for Standardization	Germany	European Standard		Russia	Sweden	United Kingdom
JIS	UNS	ISO	DIN EN/DIN	EN	Numerical Grade	GOST	SS	BS EN/BS
C3710	C37000	CuZn39Pb1	CuZn38Pb1.5	CuZn38Pb1	CW607N	LS59-1	CuZn38Pb1	CZ129

CuZn38Pb1 Corresponding Standards(Same grade name, different standards)

1	EN 12164-2016
	CuZn38Pb1 CW607N
2	EN 12420-2014
	CuZn38Pb1 CW607N
3	EN 12167-2024
	CuZn38Pb1 CW607N
4	DIN EN 12449-2019
	CuZn38Pb1 CW607N
5	EN 12449-2023
	CuZn38Pb1 CW607N

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!