CuZn36Pb2As CW602N - EN 12420-2014

Grade	CuZn36Pb2As
European Standard Steel Grade	CW602N
Corresponding Standard	EN 12420-2014 Copper and Copper Alloys - Forgings
Classification	Copper and Copper Alloys
Density	8.4 g/cm³

CuZn36Pb2As Chemical Element Composition Content (%)

Component	Fe	Mn	Ni	Cu	As	Pb	Al	Sn	Other Total	More
Minimum Value	-	-	-	61	0.02	1.7	-	-	-	Zn:余量
Maximum Value	0.1	0.1	0.3	63	0.15	2.8	0.05	0.1	0.2	Zn:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuZn36Pb2As Mechanical Properties

condition	Mark	Heat Treatment or Condition	Hardness HBW
Forged product (Group I)	CW602N-M	Manufacturing State (M)	No specification
Forged product (Group I)	CW602N-H060	Hardness (H060)	≥60

Approximate Comparison Table Brass

China		Japan	United States		International Organization for Standardization		France	Russia	Australia
GB	ISC	JIS	ASTM	UNS	ISO	Numerical Grade	NF EN/NF	GOST	Australian Standard AS
HPb62-2-0.1	T36210	C3521 C35210	62Cu-36Zn-2Pb-.1As	C35210	CuZn36Pb2As	C35210	CuZn36Pb2As C35210	ЛСМш62-2-0.1	352C C35210

CuZn36Pb2As Corresponding Standards(Same grade name, different standards)

1	GB /T 20078-2006
	CuZn36Pb2As CW602N
2	EN 12420-2014
	CuZn36Pb2As CW602N
3	EN 12167-2024
	CuZn36Pb2As CW602N
4	DIN EN 12449-2019
	CuZn36Pb2As CW602N
5	EN 12449-2023
	CuZn36Pb2As CW602N

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!