ZCuSn10P1 10-1锡青铜 - YB /T 036.5-1992

Grade	ZCuSn10P1
Other Names
Corresponding Standard	YB /T 036.5-1992 General Technical Conditions for the Manufacture of Metallurgical Equipment Copper Alloy Castings
Classification	Copper and Copper Alloys

ZCuSn10P1 Chemical Element Composition Content (%)

Component	Fe	Si	P	S	Al	Sn	Bi	Sb	Other Total	More
Minimum Value	-	-	0.5	-	-	9	-	-	-	Cu:余量
Maximum Value	0.2	0.02	1	0.02	0.02	11.5	0.005	0.3	0.75	Cu:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

ZCuSn10P1 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting S	≥196	-	≥3	≥80
Casting	Metal Mold Casting J	≥245	-	≥5	≥90

Approximate Comparison Table Cast tin bronze

China	United States	International Organization for Standardization		France	European Standard		Russia
GB	UNS	ISO	Numerical Grade	NF EN/NF	EN	Numerical Grade	GOST
ZCuSn10P1	C90710	GCuSn10P1	C90710	U-E10PY300 C90710	CuSn11P-C	CC481K	БрО10Ф1Л

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!