CuSn10Pb10-C CC495K - EN 1982-2017

Grade	CuSn10Pb10-C
European Standard Steel Grade	CC495K
Corresponding Standard	EN 1982-2017 Copper and Copper Alloys – Ingots and Castings
Classification	Copper and Copper Alloys

CuSn10Pb10-C Chemical Element Composition Content (%)

	Component	Fe	Si	Mn	P	S	Ni	Cu ^①	Pb	Al	Zn	Sn	Sb
铸件	Minimum Value	-	-	-	-	-	-	78	8	-	-	9	-
铸件	Maximum Value	0.25	0.01	0.2	0.1	0.1	2	82	11	0.01	2	11	0.5

CuSn10Pb10-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥180	≥80	≥8	≥60
Casting	Continuous Casting GC	≥220	≥110	≥8	≥70
Casting	Centrifugal Casting GZ	≥220	≥110	≥6	≥70
Casting	Permanent Mold Casting GM	≥220	≥110	≥3	≥65

Approximate Comparison Table Copper and Copper Alloy

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	United Kingdom
JIS	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
LBC3	C93700	CuPb10Sn10	G-CuPb10Sn GC-CuPb10Sn GZ-CuPb10Sn	2.1176.01 2.1176.03 2.1176.04	CuSn10Pb10	CuSn10Pb10-C	CC495K	BrO10S10	LB2

CuSn10Pb10-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!