CuAl10Ni3Fe2-C CC332G - EN 1982-2017

Grade	CuAl10Ni3Fe2-C
European Standard Steel Grade	CC332G
Corresponding Standard	EN 1982-2017 Copper and copper alloys – Ingots and castings
Classification	Copper and Copper Alloys

CuAl10Ni3Fe2-C Chemical Element Composition Content (%)

	Component	Fe	Si	Mn	Ni ^①	Cu ^②	Pb ^③	Al ^①	Zn	Sn	Mg
铸件	Minimum Value	1	-	-	1.5	80	-	8.5	-	-	-
铸件	Maximum Value	3	0.2	2	4	86	0.1	10.5	0.5	0.2	0.05

CuAl10Ni3Fe2-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥500	≥180	≥18	≥100
Casting	Permanent Mold Casting GM	≥600	≥250	≥20	≥130
Casting	Centrifugal Casting GZ	≥550	≥220	≥20	≥120
Casting	Continuous Casting GC	≥550	≥220	≥20	≥120

Approximate Comparison Table Copper and Copper Alloy

CuAl10Ni3Fe2-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!