CuAl10Fe5Ni5-C CC333G - DIN EN 1982-2017

Grade	CuAl10Fe5Ni5-C
Germany W-Nr.	CC333G
Corresponding Standard	DIN EN 1982-2017 Copper and Copper Alloys – Ingots and Castings
Classification	Copper and Copper Alloys

CuAl10Fe5Ni5-C Chemical Element Composition Content (%)

	Component	Fe ^①	Si	Mn	Cr	Ni ^①	Cu	Pb	Al	Zn	Sn	Mg	Bi
铸件	Minimum Value	4	-	-	-	4	76	-	8.5	-	-	-	-
铸件	Maximum Value	5.5	0.1	3	0.05	6	83	0.03	10.5	0.5	0.1	0.05	0.01

CuAl10Fe5Ni5-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥600	≥250	≥13	≥140
Casting	Permanent Mold Casting GM	≥650	≥280	≥7	≥150
Casting	Centrifugal Casting GZ	≥650	≥280	≥13	≥150
Casting	Continuous Casting GC	≥650	≥280	≥13	≥150

New and Old Grade Replacement List

CuAl10Fe5Ni5-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!