CuAl11Fe6Ni6-C CC334G - EN 1982-2017

Grade	CuAl11Fe6Ni6-C
European Standard Steel Grade	CC334G
Corresponding Standard	EN 1982-2017 Copper and copper alloys – Ingots and castings
Classification	Copper and Copper Alloys

CuAl11Fe6Ni6-C Chemical Element Composition Content (%)

	Component	Fe ^①	Si	Mn	Ni	Cu ^①	Pb	Al ^①	Zn	Sn	Mg
铸件	Minimum Value	4	-	-	4	72	-	10	-	-	-
铸件	Maximum Value	7	0.1	2.5	7.5	82.5	0.05	12	0.5	0.2	0.05

CuAl11Fe6Ni6-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥680	≥320	≥5	≥170
Casting	Permanent Mold Casting GM	≥750	≥380	≥5	≥185
Casting	Centrifugal Casting GZ	≥750	≥380	≥5	≥185

Approximate Comparison Table Copper and Copper Alloy

CuAl11Fe6Ni6-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!