CuNi10Fe1Mn1-C CC380H - EN 1982-2017

Grade	CuNi10Fe1Mn1-C
European Standard Steel Grade	CC380H
Corresponding Standard	EN 1982-2017 Copper and Copper Alloys – Ingots and Castings
Classification	Copper and Copper Alloys

CuNi10Fe1Mn1-C Chemical Element Composition Content (%)

	Component	Fe	C	Si	Mn	Ni	Cu	Nb	Pb	Al	Zn
castings	Minimum Value	1	-	-	1	9	84.5	-	-	-	-
castings	Maximum Value	1.8	0.1	0.1	1.5	11	-	1	0.03	0.01	0.5

CuNi10Fe1Mn1-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥280	≥120	≥20	≥70
Casting	Centrifugal Casting GZ	≥280	≥100	≥25	≥70
Casting	Continuous Casting GC	≥280	≥100	≥25	≥70

Approximate Comparison Table Copper and Copper Alloy

CuNi10Fe1Mn1-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!