CuZn39Pb1Al-C CC754S - EN 1982-2017

Grade	CuZn39Pb1Al-C
European Standard Steel Grade	CC754S
Corresponding Standard	EN 1982-2017 Copper and copper alloys – Ingots and castings
Classification	Copper and Copper Alloys

CuZn39Pb1Al-C Chemical Element Composition Content (%)

	Component	Fe	Si ^④	Mn	P	Ni	Cu ^③	Pb	Al ^②	Sn	More
铸件	Minimum Value	-	-	-	-	-	58	0.5	-	-	Zn:余量
铸件	Maximum Value	0.7	0.05	0.5	0.02	1	63	2.5	0.8	1	Zn:余量

CuZn39Pb1Al-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥220	≥80	≥15	≥65
Casting	Permanent Mold Casting GM	≥280	≥120	≥10	≥70
Casting	Die Cast GP	≥350	≥250	≥3	≥110
Casting	Centrifugal Casting GZ	≥280	≥120	≥10	≥70

Approximate Comparison Table Copper and Copper Alloy

CuZn39Pb1Al-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!