CuZn16Si4-C CC761S - EN 1982-2017

Grade	CuZn16Si4-C
European Standard Steel Grade	CC761S
Corresponding Standard	EN 1982-2017 Copper and copper alloys – Ingots and castings
Classification	Copper and Copper Alloys

CuZn16Si4-C Chemical Element Composition Content (%)

	Component	Fe	Si	Mn	P	Ni	Cu	Pb	Al	Sn	Sb	More
铸件	Minimum Value	-	3	-	-	-	78	-	-	-	-	Zn:余量
铸件	Maximum Value	0.6	5	0.2	0.03	1	83	0.8	0.1	0.3	0.05	Zn:余量

CuZn16Si4-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥400	≥200	≥10	≥100
Casting	Permanent Casting GM	≥500	≥300	≥8	≥130
Casting	Die Cast GP	≥500	≥340	≥5	≥190
Casting	Centrifugal Casting GZ	≥500	≥300	≥8	≥130

Approximate Comparison Table Cupper and cupper alloy

CuZn16Si4-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!