CuZn25Al5Mn4Fe3-C CC762S - DIN EN 1982-2017

Grade	CuZn25Al5Mn4Fe3-C
Germany W-Nr.	CC762S
Corresponding Standard	DIN EN 1982-2017 Copper and Copper Alloys – Ingots and Castings
Classification	Copper and Copper Alloys

CuZn25Al5Mn4Fe3-C Chemical Element Composition Content (%)

	Component	Fe	Si	Mn	P	Ni	Cu ^①	Pb	Al	Sn	Sb	More
铸件	Minimum Value	1.5	-	2.5	-	-	60	-	3	-	-	Zn:余量
铸件	Maximum Value	4	0.1	5	0.03	3	67	0.2	7	0.2	0.03	Zn:余量

CuZn25Al5Mn4Fe3-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥750	≥450	≥8	≥180
Casting	Permanent Casting GM	≥750	≥480	≥8	≥180
Casting	Die Cast GP	≥680	≥580	≥1	≥190
Casting	Centrifugal Casting GZ	≥750	≥480	≥5	≥190
Casting	Continuous Casting GC	≥750	≥480	≥5	≥190

CuZn25Al5Mn4Fe3-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!