CuZn25Al5Mn4Fe3-C CC762S - EN 1982-2017

Grade	CuZn25Al5Mn4Fe3-C
European Standard Steel Grade	CC762S
Corresponding Standard	EN 1982-2017 Copper and copper alloys – Ingots and castings
Classification	Copper and Copper Alloys

CuZn25Al5Mn4Fe3-C Chemical Element Composition Content (%)

	Component	Fe	Si	Mn	P	Ni	Cu ^①	Pb	Al	Sn	Sb	More
铸件	Minimum Value	1.5	-	2.5	-	-	60	-	3	-	-	Zn:余量
铸件	Maximum Value	4	0.1	5	0.03	3	67	0.3	7	0.2	0.03	Zn:余量

CuZn25Al5Mn4Fe3-C Mechanical Properties

product	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting	Sand Casting GS	≥750	≥450	≥8	≥180
Casting	Permanent Casting GM	≥750	≥480	≥8	≥180
Casting	Die Cast GP	≥680	≥580	≥1	≥190
Casting	Centrifugal Casting GZ	≥750	≥480	≥5	≥190
Casting	Continuous Casting GC	≥750	≥480	≥5	≥190

Approximate Comparison Table Copper and Copper Alloy

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia
JIS	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST
HBsC4	C86200	CuZn25Al6Fe3Mn3	G-CuZn25Al5 GK-CuZn25Al5 GZ-CuZn25Al5	2.0598.01 2.0598.02 2.0598.03	CuZn19Al6Y20	CuZn25Al5Mn4Fe3-C	CC762S	LTS23A6ZH3Mts2

CuZn25Al5Mn4Fe3-C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!